Every degree matters once a product is regulated for safety.
A single chiller drifting out of range for even a few minutes can mean a spoiled load, a failed inspection, or a health risk you didn't know about until it was too late. MechByte's Cold Chain Command Center watches every unit continuously — shop by shop/facility, sensor by sensor — and tells you the moment something moves outside its HACCP limit, not after the fact.
The Cold Chain Command Center — every shop, every unit, one screen.
How MechByte Keeps Your Cold Chain in Check
An Alert the Second a Unit Goes Out of Range
Every sensor reports continuously against its own HACCP limit. The moment a chiller or freezer drifts outside its safe range, MechByte flags it — with the unit, the location, the current reading, and how long ago it last reported — so your team can act in minutes, not after a customer complaint or a failed audit.
A Command Center for Your Whole Network
See every shop on one map, colour-coded by its worst unit — compliant, warning, critical, or offline. Drill into any site to see equipment overview, compliance percentage, and active alerts, so problems at one location never get lost in the noise of the rest of the network.
| Shop | Units | Compliance | Alerts |
|---|---|---|---|
| Malaz Warehouse-01 | 1 | 0.0% | 1 |
| Al Malaz | 1 | 0.0% | 1 |
| Granada | 1 | 0.0% | 1 |
| Panda Hyper Gallary Mall | 1 | 100.0% | 0 |
| Al Nakheel | 1 | 100.0% | 0 |
Built for Every Type of Cold Storage
Different equipment needs different limits. MechByte lets you set a precise HACCP range per unit — not one blanket rule for everything — so a frozen food freezer and a dairy chiller are each held to the standard that actually applies to them.
Why It Matters
Cold chain failures rarely announce themselves — a door left ajar, a compressor losing efficiency, a sensor quietly going offline. Catching those moments early is the difference between a routine fix and a written-off shipment.